100 Ton 3200MM CNC Press Brake Machine 4 Axis For Sale

SHENCHONG WEK 100 Ton 3200mm CNC Press Brake Machine 4+1 Axis With ESA S630 Controller

SC® 100 ton 3200mm cnc press brake is in WEK Series, which is perfect for forming small parts with low operating costs and with syncro CNC 4+1 axis control capability.

Y1, Y2 axis—controls the CNC axes of the cylinders on both sides. The X-axis controls the back gauge and forth of the back gauge, the R-axis controls the back gauge up and down, the Z1,Z2 axis control the back gauge finger left and right, and the V-axis table is CNC crowning.

Machine Feature

The fuselage adopts integral welding and integral processing structure.
Adopting the closed-loop control method composed of German electro-hydraulic servo valve and grating ruler, the slider position feedback accuracy is high, the operation is accurate and stable, the synchronization performance is good, and the bending accuracy is high.
The numerical control system can realize the functions of bending angle graphic programming, angle correction compensation,automatic calculation and automatic adjustment of bending pressure, automatic calculation of the deformation compensation amount of the working table, the unfolded length of the work piece, and the automatic back gauge of the back gauge.
ESA S630 controller controls the backgauge, which can continuous bend the complex workpiece

標準構成

100 Tons 3200mm CNC Press Brake Hydraulic Parts

Magnetic scale (ELGO Germany)
Valve unit (ARGO-HYTOS Germany)
Gear pump (SUNNY USA)
Ferrule connector (EMB Germany)
Sealing ring (SKF Sweden)

100 Tons 3200mm CNC Press Brake Electrical Parts

ESA S630 CNC controller (Touch Screen from ESA Italy)
Main motor (SIEMENS)
V axis table crowning (CNC controlled)
Backgauge servo motor (DELTA Taiwan)
Electrical components (Schneider France)
Movable foot pedal for easy operation and emergency power off function

機械の詳細

安全保護

Shenchong CNC プレスブレーキの標準安全保護には以下が含まれます。

サイドプロテクションとバックドアプロテクション

ABBスイッチ電源オフ装置付き電気キャビネット

電気ボックス内のファンが過熱を防止

オイルタンクの過熱を防ぐ冷却装置

ESA S630 コントローラー

– Graphic color 10” touch screen display (1024 x 600 pixels resolution).

– 128 silicon disk.

– Interactive 2d graphic editor for work-pieces and tools data entry.

– 2D graphic display of machine frame, work-piece and tools.

– Manual 2D graphic identification of the best bending sequence(option)

– 32 digital outputs (24Vdc, 0,7A max.) protected against overload and short-circuits.

技術的パラメータ

タイプ	WEK 100 Ton 3200MM CNC Press Brake
シリアル番号	アイテム	ユニット	仕様
1	呼び圧力	kN	1000
2	テーブルの長さ	んん	3200
3	ハウジング間の距離	んん	2660
4	喉の深さ	んん	400
5	脳卒中	んん	200
6	進入速度	mm/s	200
7	戻り速度	mm/s	120
8	作業速度	mm/s	10
9	軸（4+1）		Y1, Y2, X, R+V
10	Y1、Y2平行公差	んん	±0.01
11	X軸任意位置決め精度	んん	±0.025
12	X軸繰り返し位置決め精度	んん	±0.015
13	X軸速度	mm/s	0-500
14	X軸位置決め間隔	んん	5-1000
15	R軸繰り返し位置決め精度	んん	±0.02
16	R軸速度	mm/s	0-500
17	R軸位置決め間隔	んん	200
18	オープンハイト	んん	450
19	メインモーター	キロワット	11
20	全体寸法 (長さ幅高さ)	んん	372016902475
21	重さ	T	7.3

よくある質問

What Thick Can A 100 Ton 3200MM CNC Press Brake Bend?

The maximum thickness that a 100 ton 3200mm CNC press brake machine can bend depends on the type of material being bend and the sheet plate length. In general, a 100T3200mm press brake machine can cut the following materials at most:

Mild Steel: It can bend mild steel plates with thicknesses 4mm and the plate length 3000mm.
Stainless Steel: 100 tons 3200mm press brake can bend stainless steel plate thickness 2mm with length 3000mm.
Aluminum: It can bend aluminum plates with thicknesses 5mm and the plate length 3000mm.

これらの厚さは一般的なガイドラインであり、特定の機械や用途によって異なる場合があることに注意することが重要です。

What Is The Price of A 100 Ton 3200MM CNC Press Brake Machine?

The price of a 100tons 3200mm cnc press brake can vary greatly depending on the machine series types, number of axes, configuration, and specification of the machine. Additionally, prices may also be affected by the country of manufacture, shipping and installation costs, and any additional taxes and charges. Under normal circumstances, the price of a WEK 100 ton 3200mm hydraulic CNC press brake for sale with basic functions ranges from $25,000 to $35,000. Plus, higher-end machines with advanced performance and larger cut sizes can cost more, from $34,000 to $42,000

It is important to note that the initial cost of a プレスブレーキ is only one factor to consider when estimating its value. Other factors to consider include the machine’s reliability, ease of use, and output quality, as well as ongoing maintenance and operating costs. While the upfront cost of a CNCプレスブレーキマシン may seem high, it can provide significant cost savings and increased bending efficiency in the long run, especially for high-volume and precision cutting applications.

If you are considering buying a 100 Ton 3200MM CNC press brake machine, you can contact us. SC SHENCHONG, as a professional cnc press brake manufacturer, can not only provide you with a competitive price but also provide you with perfect customer support and warranty.