場合

250 Tons 4000MM Hybrid Servo Press Brake To Egypt

SC SHENCHONG ships one set of WDK 250 Tons 4000MM ハイブリッドサーボプレスブレーキ to Egypt.

Because of the hot weather, clients in Egypt always prefer to choose our WDK series hybrid servo press brake. This series has the advantage that the oil temperature of the machine will not increase during the machine running time so that ensure the stable running of the machine.

Machine Details - Hybrid Servo Press Brake To Egypt

タイプ	WDK-250/4000(ESA S860)
シリアル番号	アイテム	ユニット	仕様
1	呼び圧力	kN	2500
2	テーブルの長さ	んん	4000
3	ハウジング間の距離	んん	3200
4	喉の深さ	んん	400
5	脳卒中	んん	400
6	進入速度	mm/s	200
7	戻り速度	mm/s	200
8	作業速度	mm/s	10-15
9	Axis (6+1)		Y1, Y2, X, R, +V
10	Y1、Y2平行公差	んん	±0.01
11	X軸任意位置決め精度	んん	±0.025
12	X軸繰り返し位置決め精度	んん	±0.015
13	X軸速度	mm/s	0-500
14	X軸位置決め間隔	んん	5-1000
15	R軸繰り返し位置決め精度	んん	±0.02
16	R軸速度	mm/s	0-500
17	R軸位置決め間隔	んん	200
18	Z1,Z2-axis repeat positioning precision	んん	±0.05
19	Z1,Z2-axis speed	mm/s	0-500
20	Z1,Z2-axis moving spacing	んん	2000
21	オープンハイト	んん	490
22	X axis servo motor	キロワット	1
23	R axis servo motor	キロワット	1
24	メインモーター	キロワット	8×2
25	Oil tank capacity	L	80*2
26	Overall Dimensions (LWH)	んん	4540x1980x3260
27	重さ	T	16.5

シリアル番号	アイテム	構成
1	制御システム	ESA S860 (ITALY)
2	Hydraulic control system	REXROTH (Germany)
3	Ferrule	EMB (Germany)
4	High-pressure gear pump	ECKERLE (Germany)
5	Magnetic railing ruler	ELGO (Germany)
6	シールリング	SKF (Sweden)
7	Top punch and bottom die	沈中
8	Back gauge system	沈中
9	Oil cylinder	沈中
10	Heavy load rolling guide	SHANGHAI
11	一次運動	STARS Servo Motor
12	シングル/バイポーラエアスイッチ	シュナイダー
13	ACコンタクタ、サーマルリレー	シュナイダー
14	回路ブレーカー、ボタン	シュナイダー
15	ミニチュアリレー	シュナイダー
16	Linear guide, ball screw	SHAC (Taiwan)
17	Back gauge servo motor	DETAL (Taiwan)
18	Safety protection (Side and Back Guard)	沈中

To meet customers’ bending requests, SHENCHONG announce WDK Serie Hybrid Servo CNCプレスブレーキ, which provides more advantages on bending speed, energy saving and working environment.

WDK Serie press brake is equipped with a touch-screen graphic programing CNC controller and is available in 6 axes in total with 4 axes back gauge. WDK Serie is intended and designed for customers looking for better operation experience and Eco production targets.

Features Of Double Servo Pump Control System

(1) The use of servo motor makes the system low energy consumption in the working gap. The energy-saving effect is excellent. Compared with the model, the energy-saving rate is up to 70%, and the noise is even lower. When the machine is running at high speed, the noise value does not exceed 60 decibels.

(2). The distribution of oil is basically on-demand distribution without throttling loss. It can achieve real energy saving.

(3) The low temperature rises, when the ambient temperature is 38°C, the continuous working oil temperature does not exceed 50°C, which reduces the risk of oil leakage, has higher stability, and improves the service life of the hydraulic system and cylinder.

(4) Using a bidirectional gear pump, the machine tool cylinder is determined by the forward and reverse rotation of the gear pump, which reduces the dependence on the quality and stability of the hydraulic valve group. The quality of the machine tool is more stable, and it is most suitable for robots to bend.

(5) The position accuracy of the slider or the accuracy of the parts is higher than that of the proportional valve control system machine tool. After actual testing, the repeatable positioning accuracy of the slider is ±0.01mm, and the highest accuracy is ±0.005mm.

(6) The economy is better; the consumption of energy is reduced by 70% compared with the model, which greatly saves power consumption and hydraulic oil consumption.

(7) The work efficiency is higher, and the efficiency of the electro-hydraulic synchronous CNC bending machine is increased by up to 30% compared with the same period of the previous year.