100 Ton 3200MM CNC Press Brake Machine 4 Axis For Sale

SHENCHONG WEK 100 Ton 3200mm CNC Press Brake Machine 4+1 Axis With ESA S630 Controller

SC® 100 ton 3200mm cnc press brake is in WEK Series, which is perfect for forming small parts with low operating costs and with syncro CNC 4+1 axis control capability.

Y1, Y2 axis—controls the CNC axes of the cylinders on both sides. The X-axis controls the back gauge and forth of the back gauge, the R-axis controls the back gauge up and down, the Z1,Z2 axis control the back gauge finger left and right, and the V-axis table is CNC crowning.

Machine Feature

The fuselage adopts integral welding and integral processing structure.
Adopting the closed-loop control method composed of German electro-hydraulic servo valve and grating ruler, the slider position feedback accuracy is high, the operation is accurate and stable, the synchronization performance is good, and the bending accuracy is high.
The numerical control system can realize the functions of bending angle graphic programming, angle correction compensation,automatic calculation and automatic adjustment of bending pressure, automatic calculation of the deformation compensation amount of the working table, the unfolded length of the work piece, and the automatic back gauge of the back gauge.
ESA S630 controller controls the backgauge, which can continuous bend the complex workpiece

Konfiguracja standardowa

100 Tons 3200mm CNC Press Brake Hydraulic Parts

Magnetic scale (ELGO Germany)
Valve unit (ARGO-HYTOS Germany)
Gear pump (SUNNY USA)
Ferrule connector (EMB Germany)
Sealing ring (SKF Sweden)

100 Tons 3200mm CNC Press Brake Electrical Parts

ESA S630 CNC controller (Touch Screen from ESA Italy)
Main motor (SIEMENS)
V axis table crowning (CNC controlled)
Backgauge servo motor (DELTA Taiwan)
Electrical components (Schneider France)
Movable foot pedal for easy operation and emergency power off function

Szczegóły maszyny

Ochrona bezpieczeństwa

Standardowe zabezpieczenia prasy krawędziowej CNC Shenchong obejmują:

Ochrona boczna i ochrona tylnych drzwi

Szafa elektryczna z wyłącznikiem zasilania ABB

Wentylator w skrzynce elektrycznej zapobiega przegrzaniu

Urządzenie chłodzące zapobiegające przegrzaniu zbiornika oleju

Kontroler ESA S630

– Graphic color 10” touch screen display (1024 x 600 pixels resolution).

– 128 silicon disk.

– Interactive 2d graphic editor for work-pieces and tools data entry.

– 2D graphic display of machine frame, work-piece and tools.

– Manual 2D graphic identification of the best bending sequence(option)

– 32 digital outputs (24Vdc, 0,7A max.) protected against overload and short-circuits.

Parametry techniczne

TYP	WEK 100 Ton 3200MM CNC Press Brake
SR.NO.	PRZEDMIOT	JEDNOSTKA	SPECYFIKACJA
1	Ciśnienie nominalne	kN	1000
2	Długość tabeli	mm	3200
3	Odległość między obudowami	mm	2660
4	Głębokość gardła	mm	400
5	Udar	mm	200
6	Prędkość podejścia	mm/s	200
7	Prędkość powrotu	mm/s	120
8	Prędkość robocza	mm/s	10
9	Oś (4+1)		Y1, Y2, X, R+V
10	Tolerancja równoległości Y1, Y2	mm	±0,01
11	Dowolna precyzja pozycjonowania osi X	mm	±0.025
12	Precyzja powtarzania pozycjonowania osi X	mm	±0.015
13	Prędkość osi X	mm/s	0-500
14	Odległość pozycjonowania osi X	mm	5-1000
15	Precyzja powtarzania pozycjonowania osi R	mm	±0,02
16	Prędkość osi R	mm/s	0-500
17	Odległość pozycjonowania osi R	mm	200
18	Wysokość otwarta	mm	450
19	Silnik główny	kw	11
20	Wymiary całkowite (Dł.Sz.Wys.)	mm	372016902475
21	Waga	T	7.3

Często zadawane pytania

What Thick Can A 100 Ton 3200MM CNC Press Brake Bend?

The maximum thickness that a 100 ton 3200mm CNC press brake machine can bend depends on the type of material being bend and the sheet plate length. In general, a 100T3200mm press brake machine can cut the following materials at most:

Mild Steel: It can bend mild steel plates with thicknesses 4mm and the plate length 3000mm.
Stainless Steel: 100 tons 3200mm press brake can bend stainless steel plate thickness 2mm with length 3000mm.
Aluminum: It can bend aluminum plates with thicknesses 5mm and the plate length 3000mm.

Należy pamiętać, że podane grubości stanowią ogólne wytyczne i mogą się różnić w zależności od konkretnej maszyny i zastosowania.

What Is The Price of A 100 Ton 3200MM CNC Press Brake Machine?

The price of a 100tons 3200mm cnc press brake can vary greatly depending on the machine series types, number of axes, configuration, and specification of the machine. Additionally, prices may also be affected by the country of manufacture, shipping and installation costs, and any additional taxes and charges. Under normal circumstances, the price of a WEK 100 ton 3200mm hydraulic CNC press brake for sale with basic functions ranges from $25,000 to $35,000. Plus, higher-end machines with advanced performance and larger cut sizes can cost more, from $34,000 to $42,000

It is important to note that the initial cost of a prasa krawędziowa is only one factor to consider when estimating its value. Other factors to consider include the machine’s reliability, ease of use, and output quality, as well as ongoing maintenance and operating costs. While the upfront cost of a CNC press brake machine may seem high, it can provide significant cost savings and increased bending efficiency in the long run, especially for high-volume and precision cutting applications.

If you are considering buying a 100 Ton 3200MM CNC press brake machine, you can contact us. SC SHENCHONG, as a professional cnc press brake manufacturer, can not only provide you with a competitive price but also provide you with perfect customer support and warranty.