Case

SC WGK High Speed CNC Press Brake 30T 1250mm To Egypt

SC WGK high-speed CNC press brake 30t 1250mm is a hydraulic brake press with a single hydraulic cylinder design. The approach speed can reach 300 mm/s, which is almost twice as fast as that of a typical CNC brake press.

This model was ordered by our Egyptian distributor and will be used for display at the exhibition in Egypt.

1. SC WGK High Speed CNC Press Brake 30T 1250mm Technical Parameter

WGK 30T 1250mm Mini CNC Press Brake Technical Parameter Table:

ITEM	UNIT	SPECIFICATION
Nominal Pressure	kN	30
Length of Table	mm	1250
Distance Between housings	mm	1330
Throat Depth	mm	100
Stroke	mm	150
Open Height	mm	300
Main Motor	kW	4
Approach speed	mm/s	150-300
Back gauge Axis (5+1 AXIS)		Y,X,X1,R,Z,V
Y accuracy	mm	±0.01
X precision	mm	±0.05
X1 precision	mm	±0.05
R accuracy	mm	±0.1
Z accuracy	mm	±0.1
Weight	T	2.7
Dimension	mm	2010x1200x1950

2. High Speed CNC Press Brake To Egypt Configuration

Mini CNC Press Brake To Egypt Configuration Table:

ITEM	CONFIGURATION
Control system	ESA640
Main hydraulic components	First, USA
Hydraulic pump	Eckerle, Germany
Seal ring	NOK, Japan
Primary motor	Siemens
Single/bipolar air switch	Schneider
AC contactor, thermal relay	Schneider
Circuit breaker, button	Schneider
Miniature relay	Schneider
Linear guideway, ball screw	SHAC
Servo motor	DELTA, TAIWAN
Safety protection	Laser safety: MSD, Italy
	ABB: electronic box will power off when open the door.
	Back protection: Cool broad to drilling holes for side safety gauge and back safety gauge.

High Speed CNC Press Brake 30T 1250mm To Egypt Machine Video Show:

3. Features and Characters

1) Overall structure

This machine adopts welded steel plate.
The frame consists of right and left wall boards, working table, oil box, slider, CNC control system, standard die.
The stress of main parts is eliminated by vibration.

2) Feature and Advantages

Advanced configuration, high precision ,high efficiency and low noise, suit for the small hardware. Efficiency and cost saving CNC hydraulic press brake.
Using ESA 630 control system, the new product with highly special designed.
The machine has high accuracy and high strength; Y accuracy (±50 ).
Ram stroke (Y) and back gauge(X, X1,R,Z,V)are controlled by CNC system.
Back gauge is adopted ball screw and rolling guide way, X accuracy (±05mm), X1 accuracy (±0.05mm), R accuracy (±0.1mm), Z accuracy (±0.1mm).
A set of standard tools is provided with each machine.
The back door open the door machine adopt totally closed off, machine on both sides of the use of semi closed transparent protective power break.

3) Configure

Processing of the key parts of the cylinder and the piston:

Cylinder: 45# steel quenching and tempering, finish boring, extrusion
Piston rod: 45# steel quenching and tempering,cylindrical nickel phosphorus.

The WGK high-speed CNC press brake is designed specifically for bending small work pieces. It is suitable for bending thin sheets of low-carbon steel with a maximum thickness of 2mm and a length of 1250mm.

With a bending speed of up to 300mm/s, this high-speed mini bending machine is ideal for sheet metal processing workshops for bending electrical cabinets, enclosures, and for the mass production of small parts. This High Speed CNC Press Brake 30T 1250mm was ordered by our distributor in Egypt as a display model.